Foaming Water-Based Oil Splitting Degreaser, Non Caustic

General Description

QUICK SPLIT NC is a non caustic blend of water based surfactants, water based solvents, and detergents, specifically formulated to clean oily deposits from hard surfaces. QUICK SPLIT NC is blended specifically for cleaning applications where the waste stream must pass though passive or active oil water separators. QUICK SPLIT NC will temporarily trap the oily waste in the water during the cleaning process and will quickly split, thus allowing for complete separation of the oily waste from the water solution in the downstream processing equipment.

At normal surfactant use dilutions, QUICK SPLIT NCis moderate to high foaming. It is the ideal product for cleaning systems that do not require low foaming detergents. QUICK SPLIT NC will add wetting and detergency. It is an oil splitting detergent (it will not tend to emulsify soils).

For cleaning applications requiring low foam, QUICK SPLIT 12 is a suggested product. For systems requiring no foam, QUICK SPLIT 50NF is a suggested product.

Application

QUICK SPLIT NC can be applied by almost any means including mops, rags or spray equipment. Allow solutions to penetrate deposits before rinsing. Do not allow cleaning solutions to dry on surfaces before hosing.

Dilutions

QUICK SPLIT NC is a concentrated cleaner and should be diluted for best results:

Availability

QUICK SPLIT NC is available in UN approved 5 gallon pails, 55 gallon drums and bulk quantities.

Handling

Observe warning label on containers. Normal precautions for industrial chemicals apply.

pdf Quick Split NC PB (123 KB)